The objective of the game is to rearrange or unscramble the

letters to form a word. After rearranging the letters, try to give at least 1 step

on how to use it. (10 points)

1. DERSOLING

2. DRIREWVERSC

3. LITYUTI FEKNI

4. TRICALELEC LLDRI

5. INGSPLIC LSTOO

On the hot iron, carefully apply a small amount of fresh solder and coat the tip. It should still be shiny if you've done it right. As soon as you tin the tip you should start soldering your components together. After every few joins, clean and re-tin, and again before putting your iron away into storage.

screwdriver

Place the screw on the driver tip and hold both screw and tip together with the fingers of one hand. Apply very little pressure on the driver while turning in a clockwise direction until the screw engages the wood. Keep driving.

electric drill

How to Use a Drill

How to Use a DrillStep 1: Select a Drill Bit. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...Step 3: Check All Other Settings. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...Step 3: Check All Other Settings. ...Step 4: Set Up Your Material. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...Step 3: Check All Other Settings. ...Step 4: Set Up Your Material. ...Step 5: Drill the Hole. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...Step 3: Check All Other Settings. ...Step 4: Set Up Your Material. ...Step 5: Drill the Hole. ...Step 6: Examine the Hole. ...

How to Use a DrillStep 1: Select a Drill Bit. ...Step 2: Put the Chosen Bit Into the Drill. ...Step 3: Check All Other Settings. ...Step 4: Set Up Your Material. ...Step 5: Drill the Hole. ...Step 6: Examine the Hole. ...Step 7: Clean Up. ...