Direction: Identify the following
1. It is the unit of measurement for Resistance.
2. It is indicated by the fourth band.
3. It is the unit of measurement for power handling capacity.
4. Usually used to control large currents.
5. A composition where in Resistors are made up to become resistant
6. It is indicated by the first three bands.
7. An electronic device used to minimize or control the current flow in circuit.
8. Controls current which are relatively small.
9. The resistance value shown as a percentage.
10. The symbol for Ohm.

(Pasagot please)

3. The power consumption of small devices is usually measured in Watts, and the power consumption of larger devices is measured in kilowatts (kW), or 1,000 Watts.

4. REGULATOR - A device which controls the flow of current or voltage in a circuit to a certain desired level.

5. They can do that by adding tiny components called resistors.

6. As such, the first three bands denote the significant digits of the resistance and everything else shifts to the right, making the fourth band the multiplier and the fifth band the tolerance.

7. resistors, A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element.

8. An actuator is a part of a device or machine that helps it to achieve physical movements by converting energy, often electrical, air, or hydraulic, into mechanical force.

9. Calculating Resistor Values

Calculating Resistor ValuesFor example, a resistor has the following coloured markings; Yellow Violet Red = 4 7 2 = 4 7 x 102 = 4700Ω or 4k7 Ohm. The fourth and fifth bands are used to determine the percentage tolerance of the resistor.

10. this is the symbol of Ohm. (Ω)

EXPLAIN:

SANA PO MAKATULONG

#CARRYONLEARNING

MAKE ME BRAINLESS AND FOLLOW ME

FOR MORE ANSWER THANK YOU SO MUCH