A. Direction. Select the letter of the correct answer. Write your answers on a separate sheet of paper.
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire
cutter
2. Which tool is used to loosen or tighten cross-head screws?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire
cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a
screwdriver tightens screws?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire
cutter
4. Which tool is used to strip and cut wires?
a. Anti-static mat b. Hex driver c. Philips head screwdriver d. Wire
cutter
5. Which tool is used to retrieve parts from location that are too small for your hand to fit?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head
screwdriver
6. Which tool is used to clean different computer components without scratching or leaving debris?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head
screwdriver
7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head
screwdriver
8. Which tool is used to loosen or tighten slotted screws?
a. Part Retriever b. Lint-free Cloth c. Cable ties d. Flat head
screwdriver
9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that
is mainly found on laptop?
a. Anti-static mat b. Torx screwdriver c. Philips head screwdriver d. Wire
cutter
10. Which tool is used to blow away dust and debris from different computer parts without touching the
components?

a. Anti-static mat b. Hex driver c. Compressed air d. Wire
cutter