Direction: Arrange the following STEPS on how to use a compound microscope. To arrive at the correct sequence, write the NUMBER on the blank. 1-5 Carry it to your table or working place. Remember to always use both hands when carrying the microscope. Look for the revolving nosepiece. Then, turn it clockwise or counterclockwise until the LPO is back in its proper position. Get the microscope from its box or in the cabinet. Do this by grasping the curved arm with one hand and supporting the base with the other hand. Put gently the microscope down on the laboratory table with its arm facing you, With the use of tissue paper or any clean and soft cotton rag, wipe the metal parts of the microscope. You may also wipe the eyepiece and objectives with a lens paper. 6-10 Locate the eyepiece and look through it. While looking through the eyepiece, adjust the position of the mirror so that it is not glaring to the eyes. The bright circle of light is called the field of view of the microscope. Practice viewing through the microscope using both eyes open to avoid or reduce eyestrain. Find the inclination joint. Grasp the arm and slowly pull it towards you. Sit down and try looking through the eyepiece. Find the coarse adjustment. Slowly turn it upwards, then downwards. Locate the diaphragm. While looking into the eyepiece, rotate the diaphragm to the next opening

Question

Jeffersonjalata18go Jeffersonjalata18go

Science

Answered

Direction: Arrange the following STEPS on how to use a compound microscope. To arrive at the correct sequence, write the NUMBER on the blank. 1-5 Carry it to your table or working place. Remember to always use both hands when carrying the microscope. Look for the revolving nosepiece. Then, turn it clockwise or counterclockwise until the LPO is back in its proper position. Get the microscope from its box or in the cabinet. Do this by grasping the curved arm with one hand and supporting the base with the other hand. Put gently the microscope down on the laboratory table with its arm facing you, With the use of tissue paper or any clean and soft cotton rag, wipe the metal parts of the microscope. You may also wipe the eyepiece and objectives with a lens paper. 6-10 Locate the eyepiece and look through it. While looking through the eyepiece, adjust the position of the mirror so that it is not glaring to the eyes. The bright circle of light is called the field of view of the microscope. Practice viewing through the microscope using both eyes open to avoid or reduce eyestrain. Find the inclination joint. Grasp the arm and slowly pull it towards you. Sit down and try looking through the eyepiece. Find the coarse adjustment. Slowly turn it upwards, then downwards. Locate the diaphragm. While looking into the eyepiece, rotate the diaphragm to the next opening

Sagot :

Go Training: Other Questions

Hanapin Sa Hanay X Ang Inilalarawan Sa Hanay Y. Isulat Ang Letra Ng Tamang Sagot Sa Patlang.Nice Maze, Right?

Part 2 Sa Plss Paki AnswerGrade VI

A Solution Has A Volume Of 350ml And Contains 35.5g Of Naci. What Is It's Molarity

Write An Essay About Your Experience In Converting A Word Document, Slide Presentation Into Web Pages. pa Help

Homeroom Guidance 3 Week 6Let's Explore This Suggested Time Allotment: 25 Minutes What Do You Do When You Have An Issue To Resolve With Your Family Member/s? Ho

Please Answer ASAP!!50 Brainly Points Will Be Given If You Can Answer The Questions.thank You

Consequences Not To Pursue A College Degree

3. Subtract The GCF 12,9 And 18 From The LCM Of 6,5,and 30. The Difference Is_____.

Solve The Questions Given In The Picture Below

Sitwasyon #4 May Iniinom Ka Na Juice, Nang Maubos Ito Ay Wala Kang Makitang Basurahan Kaya't Sabi Ng Kaibigan Mo Itapon Mo Nalang Ito Sa Iyong Dinadaanan. Ano A

Ngunit Sa Kagandahan Ng 3.)______Namamangha Ang Karamihan

Pa Sagot Po Yung Tama Lang Po

Donnalybalbonago Donnalybalbonago · Answer 1

Answer:

STEP 2. Carry it to your table or working place. Remember to always use both hands when carrying the microscope.

Look for the revolving nosepiece. Then, turn it clockwise or counterclockwise until the LPO is back in its proper position.

STEP 1 Get the microscope from its box or in the cabinet. Do this by grasping the curved arm with one hand and supporting the base with the other hand.

STEP 3 Put gently the microscope down on the laboratory table with its arm facing you, With the use of tissue paper or any clean and soft cotton rag, wipe the metal parts of the microscope.You may also wipe the eyepiece and objectives with a lens paper. 6-10 Locate the eyepiece and look through it.

STEP 4: While looking through the eyepiece, adjust the position of the mirror so that it is not glaring to the eyes. The bright circle of light is called the field of view of the microscope.

STEP 5 Practice viewing through the microscope using both eyes open to avoid or reduce eyestrain. Find the inclination joint. Grasp the arm and slowly pull it towards you. Sit down and try looking through the eyepiece.

STEP 6 Find the coarse adjustment. Slowly turn it upwards, then downwards. Locate the diaphragm. While looking into the eyepiece, rotate the diaphragm to the next opening

Explanation:

NOT SUREE

BUT I THINK THAT IS