TRUE OR FALSE
__1. In replacing a device/component inside the computer system,
compatibility issues should be addressed.
__2. In replacing the main memory/RAM, the number of RAM sockets
must be checked. Motherboards support different groupings and
number of sockets.
__3. If the optical drive will serve as an added drive on the same hard
Disk drive/data cable, the jumper setting should be set to "Slave".
__4. Always shut down the computer system and unplug power
cables before doing any device replacement.
__5. The anti-static strap is important to ensure discharge of static electricity
__6. A motherboard's standoffs are the ones that keep motherboard
above the computer system case inside the system unit.
__7. Updating the system drives may be necessary after replacing
the motherboard of a computer system.
__8. If the existing/old hard disk drive is still functional, make sure to
back up all the data stored on the hard drive.
__9. It is advised to apply thermal paste before mounting the CPU
cooler fan.
__10. The data connector of a SATA hard disk drive is different from of an IDE hard disk drive.​